Revision 13

Windrose is a PC-exclusive title during its Early Access phase, running on Unreal Engine 5. The official system requirements remained unchanged from the demo specs when the game launched on April 14, 2026, though Kraken Express notes that requirements are subject to change during development as optimization continues.

Minimum Requirements

Recommended Requirements

Hardware Analysis

The minimum specs are above average for a survival game. Requiring a GTX 1080 Ti as the floor means older mid-range GPUs like the GTX 1060 or RX 580 will not provide a playable experience. The 16 GB RAM minimum is standard for modern open-world games. The recommended RTX 3080 is a high-end GPU, suggesting that Windrose at maximum settings is visually demanding. Players targeting 1440p or higher resolutions at stable frame rates should aim for the recommended specs. A GPU with at least 8 GB of VRAM is needed for a decent experience.

SSD Recommendation

The developers strongly recommend an SSD for the best experience. Windrose uses procedural generation combined with hand-crafted elements, which means frequent streaming of assets as you explore new areas and sail between islands. An SSD significantly reduces load times when entering dungeons, transitioning between ship and shore, and loading new island terrain. The minimum spec lists SSD as Recommended while the recommended spec lists it as Required. In practice, playing on a mechanical hard drive is likely to cause texture pop-in and stuttering, especially when sailing at speed through the archipelago.

Multiplayer Hosting

Self-hosting a multiplayer server supporting the full 8-player cap requires additional RAM beyond the stated minimums. If you plan to host a co-op session on your own machine, expect to need more than 16 GB of RAM for comfortable performance. Dedicated server hosting shifts this load to a separate machine, and many third-party providers offer Windrose-specific rental plans from launch.

Early Access Optimization

The developers have acknowledged that performance will improve over time during Early Access. The demo received mixed reports on optimization, with some players experiencing frame drops in dense areas or during naval combat with many effects on screen. Ongoing optimization work is part of the 1.5 to 2.5 year Early Access plan. Graphics settings in the demo included options for texture quality, shadow quality, view distance, anti-aliasing, and effects quality. Lowering shadows and effects quality provided the biggest performance gains according to community reports.

Console Plans

Windrose is PC-only at Early Access launch (Steam, Epic Games Store, and Stove). Console versions are planned but secondary to PC development. No console system requirements or release dates have been announced. The developers have indicated that console ports will come after the PC version reaches a stable state in Early Access or at full launch.

Platforms at Launch

In-Game Graphics Settings

Windrose exposes the standard UE5 settings menu. Two of the available sliders account for most of the FPS swing on mid and low-end hardware, with the rest producing smaller, incremental gains. Adjusting them in the order below usually reaches a stable frame rate without needing deep engine tweaks.

Dropping Shader Quality to Low and Resolution Scale to 70 to 75 percent alone covers the bulk of available FPS gains on minimum-spec hardware. Foliage density is the next biggest contributor, which matters most in the Coastal Jungle and Foothills biomes where grass and tree cover are thickest.

Low-End and Potato Mode Preset

A stripped-down preset for players at or below the minimum spec, aimed at a stable 60 FPS at 1080p in most areas. Dense naval combat and interior jungle zones may still dip below that target; the preset gives up visual quality first rather than frame time.

Players hosting an 8-player co-op session on this tier should expect additional RAM pressure beyond the 16 GB minimum. Dedicated server hosting moves that load off the play machine and usually produces a cleaner experience for the host.

Hardware Tier Presets

Three presets cover the realistic Early Access hardware range, each tuned for a stable 60 FPS at 1080p as the baseline. Higher resolutions are noted where the tier reliably reaches them.

• Tier 1: minimum spec floor, GTX 1080 Ti or RX 6800, 16 GB RAM. Use the potato preset above. Expected result: stable 60 FPS at 1080p in most zones, with dips in naval combat.

• Tier 2: RTX 3060 Ti or RX 6700 XT, 16 to 32 GB RAM, Ryzen 5 5600X. Resolution Scale 80 to 90 percent, Shader Quality Medium, Textures Medium, Effects Low, Shadows Medium, Grass Medium, Anti-Aliasing High, Motion Blur Off. Expected result: 60 to 80 FPS at 1080p, stable 60 FPS at 1440p with an 80 to 85 percent resolution scale.

• Tier 3: RTX 3080 or RX 6800 XT and better, 32 GB RAM, Ryzen 7 5800X or better. Resolution Scale 100 percent, Shader Quality Medium to High, Textures High, Grass High, View Distance High, Anti-Aliasing High, Motion Blur Off. Expected result: 60 to 100 or more FPS at 1440p.

Windows and System Tweaks

Some of the largest wins do not come from the in-game menu at all. Several Windows-side defaults cost measurable frame time and are easy to change.

• Power Plan: switch Windows to High Performance in Power Options. The Balanced plan parks CPU cores, which costs frame pacing during combat and shader compilation bursts.

• Game Mode: enable it under Settings, Gaming, Game Mode. It suppresses Windows Update and background service priority during play.

• Hardware-Accelerated GPU Scheduling (HAGS): on modern GPUs (RTX 2000 series and above, RX 6000 series and above) with Windows 11 and current drivers, enabling HAGS in Display, Graphics Settings reduces CPU to GPU scheduling overhead. On older hardware it can introduce stutter; test with a short play session before committing.

• Background applications: close browser tabs, disable the Steam in-game overlay if unused, and turn off Xbox Game Bar (Settings, Gaming, Xbox Game Bar). Video calls and screen-share sessions in chat apps should be paused before launching the game.

• Storage: an NVMe SSD is strongly recommended. UE5 asset streaming across the archipelago causes texture pop-in and stutter on mechanical drives regardless of in-game settings.

First-launch shader compilation is a one-time cost that affects every UE5 title. Expect 10 to 30 minutes of in-game stutter while shaders finish compiling after install or after a driver update. No amount of setting tweaks bypasses this step; it is the engine warming up.

Linux Troubleshooting

Windrose is not officially supported on Linux, but the game is playable through Proton with some setup. Most AMD Radeon cards run it cleanly out of the box. Most Nvidia setups on the 595 Linux driver branch hit a fatal error on launch and need one of the workarounds below. The fixes here are ordered from least disruptive to most invasive.

Fatal Error on Launch (Nvidia 595 Driver Branch)

If the game crashes before it reaches the main menu with a generic Unreal Engine 5 fatal error, the usual cause on Linux is an interaction between the 595 Nvidia driver and the Proton NGX updater process. Two fixes work; try the launch option first.

• Launch option fix: right-click Windrose in the Steam library, open Properties, and paste PROTON_NO_NGX_UPDATER=1 %command% into the Launch Options box. This disables the Nvidia NGX updater inside Proton and clears the crash on most 595-driver systems. A secondary flag, PROTON_VKD3D_HEAP=1, helps if memory-related crashes persist after the NGX fix.

• Driver downgrade: if the launch option is not enough, roll the Nvidia driver back from the 595 branch to 590.48.01 using the package manager for your distribution. After the downgrade, delete the shader-cache folders for app ID 3041230 inside both the Steam shadercache and compatdata directories so the game rebuilds a clean profile on next launch.

Broken Colors and Flickering Textures

If the game launches but colors look oversaturated or textures flicker wildly, the Proton version is too old. Older builds around the 8.0-5 line cannot handle the Unreal Engine 5 renderer this game ships with.

• Install a current community Proton build (GE-Proton10-34 or newer) using a Proton manager tool, then force Windrose to use that specific compatibility tool under Steam properties.

• If item textures specifically flicker while the rest of the scene looks fine, open the in-game graphics menu and switch the upscaling method from TSR to FSR. This is a known Proton-side issue with the TSR path.

Microsoft Visual C++ Runtime Pop-Up

A fresh Proton prefix can throw a dialog demanding the Microsoft Visual C++ 2015-2022 runtime. The fix is to install the vcrun2022 component into the game's prefix using Protontricks: select Windrose from the library list, choose the default wine prefix, pick the option to install a Windows DLL or component, scroll to vcrun2022, and apply.

Crash When Changing Graphics Settings

Some Linux setups crash when the in-game graphics quality slider is changed mid-session, particularly at the higher lighting presets. A reliable workaround is to edit GameUserSettings.ini in the game's Proton prefix and set sg.GlobalIlluminationQuality=1, then avoid further changes to lighting-related sliders from inside the game.

Linux Co-Op and Memory Notes

Peer-to-peer hosting from a Linux machine can hand friends severe disconnects or infinite loading screens because the in-game host path relies on Windows-side networking behavior. The more stable setup for Linux hosts is to run a dedicated server instead and have the group connect to it. See

Dedicated Server Hosting and Multiplayer for the full co-op setup and player-cap guidance.

Memory pressure is higher on Linux than on Windows because the Proton translation layer adds overhead. On a 16 GB system the game can push past available RAM during island streaming and pirate-camp loads, producing micro-stutters. A 32 GB configuration removes most of that stutter on the same GPU.

Linux Fixes at a Glance

Quality Preset Reference for Optimization

Players targeting specific frame rates can use the preset table below as a starting point for each quality tier. The in-game Auto Set Quality option fills in roughly the Recommended column based on detected hardware, but manual tuning often squeezes out another 10-15 frames per second on mid-range systems without a visible image-quality drop.

Tuning Notes

Resolution Upscaling is the single most impactful toggle on lower-end hardware because it drops the internal render resolution while keeping the UI at native display resolution. Dropping Upscaling to 60% on a GTX 1080 Ti recovers a large portion of the frame rate cost at 1080p. Vertical Sync is recommended Off across all presets because Windrose uses an internal frame pacing limiter that often fights with VSync and introduces stutter. Motion Blur is a personal preference toggle that does not materially change performance; Lens Dirt Effect also has minimal performance cost but is visually divisive.

GPU memory monitoring: the graphics settings menu does not expose a VRAM utilization meter, so dialing in the right texture and reflection tiers is a trial-and-error exercise. Start at the Recommended preset, play a coastal combat fight, and step down Textures or Reflections by one tier if VRAM-driven stuttering appears. On stable 60 fps at Recommended, raising the Frame Rate Limit from 60 to 120 is usually safe if the monitor supports the higher refresh rate.